TB6600 STEPPER MOTOR DRIVER CONTROLLER 4A 9~42V 32 MICRO-STEP CNC 1 AXIS

1,300.0

TB6600 Stepper Motor Driver Controller 4A 9~42V 32 Micro-Step CNC 1 Axis

Add to Wishlist
Add to Wishlist
Share

    TB6600 DC12-45V 4.5A Two Phase Hybrid Stepper Motor driver Pakistan have Input signal interface has two configurations: the user may need to use common anode connection or common cathode connection.

    1, common anode connection: respectively, CP +, DIR +, EN + is connected to the power supply control system, if this is the + 5V power supply can be connected directly, if this power is greater than + 5V, shall be an additional external current limiting resistor R to ensure that the internal optical coupling to drive a driving current of 8-15mA. Pulse input signal CP- access; this time, DIR-, EN- effective at low level.
    2, common cathode connection: respectively CP-, DIR-, EN- connected to the control system ground terminal (SGND, isolated from power ground); + 5V pulse input signal is added by CP +; this time, DIR +, EN + in active high. Current limiting resistor R connected in the same values and common anode connection. By liking Our Facebook Page Embedder Studio , you can get special discount. Data Sheet of TB6600 Stepper Motor Driver Controller 4A 9~42V 32 Micro-Step CNC 1 Axis can be also downloaded from the link
    TB6600 DC12-45V 4.5A Two Phase Hybrid Stepper Motor driver Pakistan
    NOTE: EN end do not take, when EN effective rotor in the free state (offline), then the motor shaft can be rotated manually, do for your adjustment. After manual adjustment is completed, then the EN set an invalid state to continue automatic control.
    Features:
    This drive is an upgraded version of TB6600, heightening segments to 32 segments, for high-use segments. Applicable stepper motor: 42,57,86 type 2-phase 4-phase (4-wire line 6 line 8)
    1,9V-42V DC power supply;
    2, H-bridge bipolar constant phase flow drive;
    3, the maximum output current of 4.0A eight optional;
    4, the largest segment of the six segments 32 modes are available;
    5, the input signal is high-speed optical isolation;
    6, the standard common anode single-pulse interface;
    7, holding off function;
    8, semi-enclosed housing to accommodate more demanding environments;
    9, provide energy current semi-automatic locking function;
    10, built-in temperature protection and overcurrent protection.
    11,201g