DS18B20 DIGITAL TEMPERATURE SENSOR WATERPROOF

250.0

WATERPROOF DS18B20 DIGTAL TEMPERATURE SENSOR

Add to Wishlist
Add to Wishlist
Share

    Probe DS18B20 Waterproof temperature sensor chip using original
    High quality stainless steel pipe anti- rust waterproof package
    Stainless steel housing (6 * 50mm), lead length 100cm
    After rigorous testing each probe individually wrapped
    3.0V ~ 5.5V power supply
    9 to 12 adjustable resolution
    Temperature range -55 ° ~ +125 °
    No external components , the unique single- bus interface
    Output leads : Red (VCC), yellow (DATA), black (GND)

    FEATURES
    Unique 1-Wire interface requires only one
    port pin for communication
    Multidrop capability simplifies distributed
    temperature sensing applications
    Requires no external components
    Can be powered from data line. Power supply range is 3.0V to 5.5V
     Zero standby power required
     Measures temperatures from -55°C to
    +125°C. Fahrenheit equivalent is -67°F to
    +257°F
    ±0.5°C accuracy from -10°C to +85°C
    Thermometer resolution is programmable
    from 9 to 12 bits
    Converts 12-bit temperature to digital word in
    750 ms (max.)
    User-definable, nonvolatile temperature alarm
    settings
    Alarm search command identifies and
    addresses devices whose temperature is
    outside of programmed limits (temperature
    alarm condition)
    Applications include thermostatic controls,
    industrial systems, consumer products,
    thermometers, or any thermally sensitive system

    DESCRIPTION

    The DS18B20 Digital Thermometer provides 9 to 12-bit (configurable) temperature readings which
    indicate the temperature of the device.
    Information is sent to/from the DS18B20 over a 1-Wire interface, so that only one wire (and ground)
    needs to be connected from a central microprocessor to a DS18B20. Power for reading, writing, and
    performing temperature conversions can be derived from the data line itself with no need for an external
    power source.
    Because each DS18B20 contains a unique silicon serial number, multiple DS18B20s can exist on the
    same 1-Wire bus. This allows for placing temperature sensors in many different places. Applications
    where this feature is useful include HVAC environmental controls, sensing temperatures inside buildings,
    equipment or machinery, and process monitoring and control.